BIG SIGNAL Balun 4:1
4:1 Current Balun for Matching Balanced Antennas to 50-Ohm Coaxial Feed Lines
The BIG SIGNAL Balun 4:1 is a high-performance current balun with a 4:1 impedance transformation ratio, designed to provide the proper transition between a 50-ohm unbalanced coaxial feed line and a balanced antenna or driven element with an impedance close to 200 Ohms.
In addition to providing impedance transformation, its current-balun configuration promotes a balanced current distribution between both sides of the driven element and helps limit common-mode currents that may flow along the outside surface of the coaxial cable shield.
Type: current balun with impedance transformation
Ratio: 4:1
Application: balanced antennas with impedance close to 200 Ohms
Feed line: 50-ohm coaxial cable
Primary function: impedance transformation, current balancing, and common-mode current suppression
Typical applications: dipoles / loops / directional antennas and other compatible balanced antenna systems
Why Use a 4:1 Current Balun?
• Transforms impedance
Its 4:1 ratio allows balanced antennas with an impedance close to 200 Ohms to be matched to a conventional 50-ohm coaxial feed line, providing the proper transition between the two systems.
• Balances current in the driven element
Helps maintain symmetrical current distribution between both sides of a balanced antenna, allowing the antenna system to operate more closely to its intended design.
• Reduces common-mode currents
Helps limit unwanted currents that may flow along the outside surface of the coaxial cable shield, reducing unwanted participation of the feed line in the radiating system.
• Helps preserve the radiation pattern
By reducing unwanted radiation from the coaxial feed line, it can help minimize asymmetry and distortion of the antenna's radiation pattern.
• Improves feed-line isolation
Provides a more controlled transition between the unbalanced coaxial feed line and the balanced antenna element, helping decouple the feed line from the radiating system.
• Can reduce unwanted RF in the shack
Reducing common-mode currents can help minimize RF conducted back toward the radio shack along the outside of the coaxial feed line, as well as certain RFI and equipment-coupling issues.
Impedance Matching and Balanced Antenna Feeding
The BIG SIGNAL Balun 4:1 is especially well suited for feeding balanced antennas with a feed-point impedance close to 200 Ohms from a 50-ohm coaxial feed line, combining impedance transformation, current balancing, and common-mode current suppression in a single device.
• Dipoles with compatible feed-point impedances.
• Loops and loop antennas requiring a 4:1 transformation ratio.
• Directional antennas with balanced driven elements.
• Systems requiring a transition from approximately 200 Ohms to 50 Ohms.
• Installations where common-mode current suppression is required.
• Stations requiring improved isolation between the antenna and coaxial feed line.
4:1 Transformation. Balanced Currents. Better Control of Your Antenna System.
The BIG SIGNAL Balun 4:1 combines impedance transformation with current-balun operation, helping match balanced antennas with an impedance of approximately 200 Ohms to 50-ohm coaxial feed lines, balance driven-element currents, and reduce common-mode currents.
BIG SIGNAL Balun 4:1
4:1 Current Balun for Matching Balanced Antennas to 50-Ohm Coaxial Feed Lines
The BIG SIGNAL Balun 4:1 is a high-performance current balun with a 4:1 impedance transformation ratio, designed to provide the proper transition between a 50-ohm unbalanced coaxial feed line and a balanced antenna or driven element with an impedance close to 200 Ohms.
In addition to providing impedance transformation, its current-balun configuration promotes a balanced current distribution between both sides of the driven element and helps limit common-mode currents that may flow along the outside surface of the coaxial cable shield.
Type: current balun with impedance transformation
Ratio: 4:1
Application: balanced antennas with impedance close to 200 Ohms
Feed line: 50-ohm coaxial cable
Primary function: impedance transformation, current balancing, and common-mode current suppression
Typical applications: dipoles / loops / directional antennas and other compatible balanced antenna systems
Why Use a 4:1 Current Balun?
• Transforms impedance
Its 4:1 ratio allows balanced antennas with an impedance close to 200 Ohms to be matched to a conventional 50-ohm coaxial feed line, providing the proper transition between the two systems.
• Balances current in the driven element
Helps maintain symmetrical current distribution between both sides of a balanced antenna, allowing the antenna system to operate more closely to its intended design.
• Reduces common-mode currents
Helps limit unwanted currents that may flow along the outside surface of the coaxial cable shield, reducing unwanted participation of the feed line in the radiating system.
• Helps preserve the radiation pattern
By reducing unwanted radiation from the coaxial feed line, it can help minimize asymmetry and distortion of the antenna's radiation pattern.
• Improves feed-line isolation
Provides a more controlled transition between the unbalanced coaxial feed line and the balanced antenna element, helping decouple the feed line from the radiating system.
• Can reduce unwanted RF in the shack
Reducing common-mode currents can help minimize RF conducted back toward the radio shack along the outside of the coaxial feed line, as well as certain RFI and equipment-coupling issues.
Impedance Matching and Balanced Antenna Feeding
The BIG SIGNAL Balun 4:1 is especially well suited for feeding balanced antennas with a feed-point impedance close to 200 Ohms from a 50-ohm coaxial feed line, combining impedance transformation, current balancing, and common-mode current suppression in a single device.
• Dipoles with compatible feed-point impedances.
• Loops and loop antennas requiring a 4:1 transformation ratio.
• Directional antennas with balanced driven elements.
• Systems requiring a transition from approximately 200 Ohms to 50 Ohms.
• Installations where common-mode current suppression is required.
• Stations requiring improved isolation between the antenna and coaxial feed line.
4:1 Transformation. Balanced Currents. Better Control of Your Antenna System.
The BIG SIGNAL Balun 4:1 combines impedance transformation with current-balun operation, helping match balanced antennas with an impedance of approximately 200 Ohms to 50-ohm coaxial feed lines, balance driven-element currents, and reduce common-mode currents.
The purchase of the products is always made on request. We manufacture all products, so manufacturing times can be added. That is why the final price of the purchase, as the final price of the shipping costs will be confirmed in an email sent afterwards.
The form of payment will be made once the email is received, so at all times you can cancel the order informing us of the process.
ES
EN
No reviews for this article yet. Be the first to add one.